NEC MC2400 - Manual (Page 60)

3-10 Configuring Your System
PCI Configuration Submenus
This submenu should only be changed by qualified technical personnel.
! CAUTION
Leave PCI Configuration Submenu at factory-default
settings. This submenu should only be changed by a
technically qualified person.
PCI Configuration Submenu
Feature Choices Description Your Setting
PCI Device, Embedded
SCSI Devices Press ENTER. N/A
Option ROM Scan Enabled
Disabled Enables option ROM scan of
the selected device.
Enable Master Enabled
Disabled Enabled selects the device as
a PCI bus master.
Latency Timer Default
0020h
0040h
0060h
0080h
00A0h
00C0h
00E0h
Minimum guaranteed time, in
units of PCI bus clocks, that a
device may be master on a
PCI bus.
PCI Device, Slot 1 - Slot 4 Submenus
This submenu should only be changed by qualified technical personnel.
! CAUTION
Leave PCI Device Submenu at factory-default settings.
This submenu should only be changed by a technically
qualified person.
PCI Device Submenu
Feature Choices Description Your Setting
Enable Master Enabled
Disabled Enables selected device as a
PCI bus master.
Latency Timer Default
020h
040h
060h
080h
0A0h
0C0h
0E0h
Minimum guaranteed time, in
units of PCI bus clocks, that a
device may be master on a
PCI bus.