NEC MC2400 - Manual (Page 153)

System Setup Utility B-3
Creating SSU Diskettes
SSU may be run directly from the E XPRESS B UILDER CD-ROM or from DOS-
bootable diskettes. Before you can run the SSU from diskettes, you must copy
the SSU from the E
XPRESS B UILDER CD-ROM to a diskette.
If your diskette drive is disabled, or improperly configured, you must use the
FLASH-resident BIOS Setup Utility (F2) to enable it so that you can use the
SSU. If necessary, you can disable the drive after you exit the SSU. Information
entered using the SSU overrides information entered using Setup.
Note: Because of license restrictions, the SSU diskette,
as created by the E XPRESS B UILDER CD-ROM, is not
bootable. In order to use this diskette, you must make it
bootable.
1. Power on the system.
2. If the diskette drive is disabled, enable it using the BIOS Setup, explained
later in this chapter Utility and ensure that it is user accessible. Specify the
correct type of diskette drive.
3. Using the E
XPRESS B UILDER CD-ROM, create the SSU diskette.