National Instruments NI PCI-6110 - Manual (Page 80)

Appendix A Specifications
NI PCI-6110/6111 User Manual A-10 ni.com
Protection
Digital trigger ..................................–0.5 V to (V
cc
+ 0.5) V
Analog trigger
On/disabled...............................±35 V
Powered off ..............................±35 V
RTSI
Trigger Lines ..........................................7
Bus Interface
Type ........................................................Master, slave
Power Requirement
+5 VDC (±5%)
NI PCI-6110 ....................................2.5 A
NI PCI-6111 ....................................2.0 A
Power available at I/O connector............+4.65 to +5.25 VDC at 1 A
Physical
Dimensions
(not including connectors) .....................31.2 by 10.6 cm
(12.3 by 4.2 in.)
I/O connector ..........................................68-pin male SCSI-II type
Maximum Working Voltage
Maximum working voltage refers to the signal voltage plus the
common-mode voltage.
Channel-to-earth .....................................42 V, Installation Category I
Channel-to-channel.................................42 V, Installation Category I