Unpacking, Safety information, Unpacking -5 safety information -5 – National Instruments NI PCI-6110 User Manual
Page 15
Chapter 1
Introduction
© National Instruments Corporation
1-5
The following list gives recommended part numbers for connectors that
mate to the I/O connector on the NI PCI-6110/6111:
•
Honda 68-position, solder cup, female connector
•
Honda backshell
Unpacking
The NI PCI-6110/6111 is shipped in an antistatic package to prevent
electrostatic damage to the device. Electrostatic discharge (ESD) can
damage several components on the device.
Caution
Never touch the exposed pins of connectors.
To avoid such damage in handling the device, take the following
precautions:
•
Ground yourself using a grounding strap or by holding a grounded
object.
•
Touch the antistatic package to a metal part of the computer chassis
before removing the device
from the package.
Remove the device
from the package and inspect the device
for loose
components or any sign of damage. Notify NI if the device
appears
damaged in any way. Do not install a damaged device
into the computer.
Store the NI PCI-6110/6111 in the antistatic envelope when not in use.
Safety Information
This section contains important safety information that you must follow
when installing and using the product.
Do not operate the product in a manner not specified in this document.
Misuse of the product can result in a hazard. You can compromise the
safety protection built into the product if the product is damaged in any
way. If the product is damaged, return it to NI for repair.
Do not substitute parts or modify the product except as described in this
document. Use the product only with the chassis, modules, accessories, and
cables specified in the installation instructions. You must have all covers
and filler panels installed during operation of the product.