National Instruments Xmath Interactive Control Design Module ICDM - Manual (Page 76)

Chapter 8 H-Infinity Synthesis
© National Instruments Corporation 8-7 Xmath Interactive Control Design Module
Ranges
To change the ranges of the sliders or plots, select View»Ranges or press
in the H
∞ window.
The slider ranges also will be changed automatically if you type a new
value which is outside the current range in the corresponding variable edit
box. The plot also can be re-ranged interactively by grabbing and dragging
the plot axes; refer to the
Interactive Plot Re-ranging section of Chapter 2,
Introduction to SISO Design .
Selecting View»Auto-scale or pressing in the H
∞ window will
cause new ranges to be assigned to the sliders and plots, based on the
current controller.