Nortech Systems Adept RS-232/TERM - Manual (Page 75)

Camera Cable Pin and Signal Information
Adept SmartController User’s Guide, Rev. E 75
Table 4-1. Breakout Cable Camera Connector Pin Assignments (RS-170)
Pin Function Notes
1 Power return
2 +12V power to camera
3 Shield (video)
4 Video from camera
5 Shield (Hd)
6 Hd (horizontal drive) to camera
7 Vd (vertical drive) to camera
8 Shield (Clock) from camera (camera 1 & 2 only)
9 Clock from camera (camera 1 & 2 only)
10 not connected
11 not connected
12 Shield (Vd)
12-Pin Hirose Female Jack, HR10A-10J-12S
This connector will normally be connected to the camera using a 10-meter camera extension cable.
For special applications, this connector will mate with a Hirose Male Plug HR10A-10P-12P
(user-supplied) or similar plug. See
Figure 4-4 for pin locations.