Nortech Systems Adept RS-232/TERM - Manual (Page 26)

Chapter 2 - SmartController Installation
26 Adept SmartController User’s Guide, Rev. E
Panel Mounting the SmartController
To panel mount the SmartController, install two brackets on each side at the rear of the
unit, as shown in
Figure 2-2 . Use the screws from the accessories kit.
Figure 2-2. Panel Mounting the SmartController
200.5
16.0
R3.6 TYP.
14.0
273.9
8.1
346.6
4X 40356-00000
6.6
44.9
44.9
359.8
8X M3 x 6MM
16.1
27.4