Nortel Networks RTU-292 - Manual (Page 72)

RTU-292 Operations Manual
5.3.8 Handset Phone Command
HS_PH
This command is to enable, disable or query the current status of Handset Phone
Expected Response: Handset Phone Response.
Examples:
HS_PH ON ; Command to enable the Handset Phone path.
%HS_PH ON E0 ; Status returned showing that the Handset Phone path is enabled.
HS_PH ?
; Command requesting the status of the Handset Phone path.
%HS_PH OFF E0 ; Status returned showing that Handset Phone is disabled.
5.3.9 Handset Radio Command
HS_RAD
This command is to enable, disable or query the current status of Handset Radio.
Expected Response: Handset Radio Response.
Examples:
HS_RAD ON ; Command to enable the Handset Radio path.
%HS_RAD ON E0 ; Status returned showing that the Handset Radio path is enabled.
HS_RAD ?
; Command requesting the status of the Handset Radio path.
%HS_RAD OFF E0 ; Status returned showing that Handset Radio is disabled.
JPS Communications, Inc. 5-6