Nortel Networks RTU-292 - Manual (Page 68)

RTU-292 Operations Manual
When a command is sent to the RTU-292 it is buffered up and acted on as soon as possible.
Once the command has been executed, the RTU-292 will return a "Status" response. The
format of this status response is explained in greater detail in the section 5.4, "Status Returned
From The RTU-292". The RTU-292 is designed to act on one command at a time. The user
must wait for a response from a given command before entering the next command.
Table 5-1 Command Summary
Null Command …………………………………….
Auto Answer Command AUTO_ANS …….
Audible Ring Command AUD_RING ……..
Date Command DATE ………………
Dial Command DIAL
Disconnect Command DISC …………………………….
Generate DTMF command +DTMF ……….
Handset Phone Command HS_PH ………….
Handset Radio Command HS_RAD ………..
Speaker Phone Command SPKR_PH ………
Speaker Radio Command SPKR_RAD …….
Speed Dial Command SD
Tel-Line Phone Command TEL_LINE_PH ….
Tel-Line Radio Command TEL_LINE_RAD ..
Time Command TIME …………..…
Software Version Command VER ………………………………..
JPS Communications, Inc. 5-2