NetComm NB2800 - Manual (Page 30)

www.netcomm.com.au Rev.1 - YML648
Page 30 NB2800 Router
Here is a list of the protocols and port ranges that are used by some common applications.
Note: Port 8080 on the Public IP Address is used for Remote Management and can
not be redirected if remote management is enabled.
Application Protocol Port Range
FTP Server TCP 21
Half Life UDP 6003, 7002, 27010, 27015, 27025
MSN Messenger TCP 6891-6900 (File-send)
TCP 1863
UDP 1863
UDP 5190
UDP 6901 (Voice)
TCP 6901 (Voice)
PC Anywhere host TCP 5631
UDP 5632
Quake 2 UDP 27910
Quake III UDP 27660 (first player)
”C:\Program Files\Quake III
Arena\quake3.exe” +set net_port 27660
27661 (second player)
Telnet Server TCP 23
Web Server TCP 80
4-4 Special Application
Some applications use multiple TCP/UDP ports to transmit data. Due to the use of NAT in the
router, these applications may not work. Port Triggering allows these applications to work
properly.
Note: Only one computer can use each Port Triggering setting at any time.