NetComm NB2800 - Manual (Page 20)

www.netcomm.com.au Rev.1 - YML648
Page 20 NB2800 Router
Chapter 3: Internet Access
This chapter describes the procedures necessary to configure the basic functions and to start up
your NetComm NB2800 Router. On successful completion of these procedures, you will be able
to access the Internet via your NetComm NB2800 Router.
3-1 Prepare your network information
In order to allow a quick reference point when setting up your NetComm NB2800 Router, it is
suggested you complete the table below with the necessary information which should be
supplied by your ISP:
Provided by some ISPs (
✓
tick indicates common minimal requirements)
Host Name: ______________________________________
Domain Name: ______________________________________
IP address given by ISP:
✓❒
Obtain IP Address automatically, or
✓❒
Static IP
IP Address (if static): _________._________._________._________
Subnet Mask: _________._________._________._________
Default Gateway: _________._________._________._________
DNS Server Primary: _________._________._________._________
DNS Server Secondary (optional): _________._________._________._________
DNS Server Third (optional): _________._________._________._________
PPP authentication:
✓❒
PPPoE
❒
PPTP
✓
User Name: ______________________________________
✓
Password: ______________________________________