NetComm NB2800 - Manual (Page 21)

Rev.1 - YML648 www.netcomm.com.au
NB2800 Router Page 21
3-2 Web-based User Interface
The NetComm NB2800 Router uses a Web-based User Interface for configuration. Start your
web browser and type http://192.168.1.1 in the browser’s address box. This address is the
factory default IP Address of your NetComm NB2800 Router. Press “Enter”.
The “Username and Password Required” prompt box will appear. Leave the “User Name”
empty and type “admin” (default password) for the “Password”. Click “OK”. The setup
screen will load.
Note: The password can be reset by restoring the factory defaults with the Reset
button.