Set-to-set messaging, Set-to-set messaging 96 – Nortel Networks Meridian M3905 User Manual
Page 96

96
Set-to-Set Messaging
Set-to-Set Messaging
With the Set-to-Set Messaging application activated, an internal caller using an
M3903
, M3904, or M3905 receives a quick visual message, which you have
selected, whenever they dial your telephone number. The length of your message
is limited to 24 characters. The message is entered through the dial pad keys
using a process similar to the one used for entering names in the Personal
Directory. Your network administrator may provide access to a list of up to ten
messages which you may customize and select as your current set-to-set message.
Only one message at a time may be customized and only one message can be
stored in your telephone’s memory.
You can check your Call Log to determine whether or not a caller was sent the
set-to-set message. A
will appear beside the call log entry of the callers who
saw your message.
To access Set-to-Set Messaging:
1. Press the
Applications
Key.
2. From the
Applications
menu, use the
Navigation
Keys to highlight Set to
Set Messaging
.
3. Press the
Select
Key.
The
Set-Set Msg
screen appears
indicating the status of the feature (on
or off) and whether or not a message
is stored (defined) in memory.
Note:
If you have activated password
protection on your Directory/Log, you will
need to enter your password to continue.
To edit the currently stored message,
or to create a new message:
1. Press the
Edit
Key.
App's
Set to Set Messaging
Select
Edit