Nortel Networks Meridian M3905 - Manual (Page 36)

36
Call Center Agent features
To Walkaway while in Not Ready
mode (Not Ready LED or LCD
indicator is on, and Not Ready is
shown on the display):
/
1. Press the Not Ready Key.
/ 2. Press the Hold Key.
3. Disconnect the headset .
To return from Walkaway:
1. Connect the headset .
/
or
/
2. Press the key next to the flashing
indicator.
Note 1: If a caller disconnects before you
return from Walkaway, the Not Ready
indicator flashes. When you return from
Walkaway, you are in Not Ready mode.
Note 2: Even if you are using the optional
handset, you must disconnect the headset
to activate walkaway mode. There is not a
quick disconnect for the handset.
Not Ready
Hold
In - Calls
Not Ready