Auto bracketing – Nikon Coolpix 4300 User Manual
Page 58

115
114
Menu Guide—The Shooting Menu
Auto Bracketing
In situations where it might be difficult to obtain a
proper exposure, auto bracketing lets you shoot
the same subject at three or five different
exposures. In WB Bracketing, the white balance is
bracketed in three shots.
SELECT
SET
AUTO BRACKETING
Off
On
WB Bracketing
OFF
F2.8
F2.8
F2.8
1/250
1/250
1/250
0.3
0.3
0.3
2272
2272
2272
16
16
16
F2.8
F2.8
F2.8
1/250
1/250
1/250
2272
2272
2272
16
16
16
Option
Description
Off
Bracketing is off and normal exposure control is used.
On
Auto bracketing is performed with the selected number of
bracketing shots and with a compensated EV value offset from
the automatically metered exposure.
WB Bracketing
The white balance is bracketed when you press the shutter
release button fully giving three shots made up of one with the
selected white balance, a reddish image and a bluish image.
The time required to save bracketed images to the memory
card is three times that required for a normally recorded image.
— On —
Each time you press the shutter release button, either
three or five shots are taken ranging from over exposed EV
values to under exposed EV values. When photographing
a high-contrast image, the image with the desired
exposure can be selected from the set of bracketed shots.
Number of shots, compensated EV value
Bracketing order
3,
±
0.3
0, +0.3, –0.3
3,
±
0.7
0, +0.7, –0.7
3,
±
1.0
0, +1.0, –1.0
5,
±
0.3
0, +0.7, +0.3, –0.3, –0.7
5,
±
0.7
0, +1.3, +0.7, –0.7, –1.3
5,
±
1.0
0, +2.0, +1.0, –1.0, –2.0
To perform auto bracketing or white balance bracketing in Continuous or VGA
Sequence mode (p. 100), hold down the shutter release button fully. A selected
number of consecutive shots are taken, after which the sequence stops
automatically.
Restrictions on Bracketing
Autoexposure bracketing can not be used when: BSS (p. 102), AE-Lock
(p. 110), or Noise Reduction (p. 116) is on, Multi-shot 16 or Ultra HS is
selected for Continuous (p. 100), or Movie (p. 50) is selected.
White-balance bracketing can not be used when: BSS or Noise Reduction is
on, image quality is set to HI (p. 81), or a setting other than Single is chosen for
Continuous.
The exposure compensation indication
b along with
the compensated EV value for the next shot are
displayed in the monitor when the bracketing is set.
SELECT
SET
AUTO BRACKETING
Off
On
WB Bracketing
OFF
— WB Bracketing —
White balance is bracketed when you press the shutter
release button fully, giving three shots made up of one
shot with the selected white balance, one reddish image
and one bluish image.
SELECT
SET
AUTO BRACKETING
Off
On
WB Bracketing
OFF
When you select white balance bracketing, the
nb
(White Balance Bracketing indication) appears in the
monitor.
E4300 (E) 02.12.9 1:47 PM Page 114