Nikon Coolpix 4300 - Manual (Page 46)

91 90
Menu Guide—The Set-Up Menu
CF Card Format
The memory card provided with your camera is
formatted at shipment. If you purchase additional
memory cards for added storage, you will
however need to format the cards before first use
to ensure that they work properly in your camera.
Formatting memory cards is also an effective way
of deleting all pictures on the card. CF CARD FORMAT
WARNING !
All images will
be deleted !
No
Format
SELECT SET
Storing Camera Settings: Controls
In å mode, the first three items in the
“Controls” menu determine what camera settings
remain in effect when the camera is turned off. If
an item is checked, the setting in effect at the
time the camera was turned off will be restored
the next time the camera is turned on. Any items
that are not checked will be restored to default settings when the
camera is turned on.
CONTROLS
Save
Save
Save
Digital
Zoom
Done
SELECT SET BK
Option Setting Affected Default
3 Flash mode Auto
2 Focus mode Autofocus
! Exposure compensation ±0.0
Digital Zoom Digital zoom On
The fourth item, Digital Zoom, is used to turn digital zoom on and off in a,
SCENE and å mode. If it is checked, digital zoom functions normally (p. 46). If
this item is not checked, digital zoom cannot be used, and pressing the T zoom
button at the maximum optical-zoom position has no effect.
To check an item, or remove the checked mark from an item that has been already
been checked, highlight the item and press
> on the Multi selector. Highlight Done
and press > on the Multi selector to put the changes into effect.
Confirming Shutter Release: Shot Confirm Lamp
If On is selected for this option, the red-eye
reduction lamp will light to confirm that the shutter
has been released. The red-eye reduction lamp
will not light if the flash has fired. SHOT CONFIRM LAMP
Controls
Shot Confirm Lam
Pic Data/Transfer
Date
Interface
Language
Reset All
Off
On
SELECT SET
Photo Information and Transfer Setting:
Pic Data/Transfer
The “Pic Data/Transfer” sub-menu contains
options for storing information about the camera
status at the time when the picture was taken as
a text file and for turning on/off the transfer mark
associated with pictures and movies as they are
taken. PIC DATA/TRANSFER
Controls
Shot Confirm Lam
Pic Data/Transfer
Date
Interface
Language
Reset All info. txt
Auto Transfer
SELECT SET
Recording Photo Information: info. txt
While On is selected in the info.txt menu, the following
information about each image recorded is stored in an
independent text file (“info.txt”):
• File number and type
• Camera type and firmware version
• Metering method
• Exposure mode
• Shutter speed
• Aperture
• Exposure compensation
• Focal length and digital zoom
• Image adjustment
• Sensitivity (ISO equivalency)
• White balance
• Sharpening
• Date of recording
• Image size and quality
• Focus area
The info.txt file is stored in the same folder as the image. When the contents of the
memory card are viewed from a computer, this file can be read with a text browser
such as Notepad or SimpleText. Images are listed in the order recorded, separated
by a blank line.
PIC DATA/TRANSFER
Controls
Shot Confirm Lam
Pic Data/Transfer
Date
Interface
Language
Reset All info. txt
Auto Transfer
SELECT SET
Off
On
E4300 (E) 02.12.9 1:47 PM Page 90