Netopia R910 - Manual (Page 47)

WAN and System Configuration 8-47
IP setup
These screens allow you to configure your network’s use of IP.
■ Details are given in Chapter 9, “IP Setup and Network Address Translation.”
Filter sets (firewalls)
These screens allow you to configure security on your network by means of filter sets and a basic firewall.
■ Details are given in Chapter 13, “Security.”
IP address serving
These screens allow you to configure IP address ser ving on your network by means of DHCP, WANIP, and BootP.
■ Details are given in “IP address ser ving” on page 9-66 .
Date and time
You can set the system’s date and time in the Set Date and Time screen.
Select Date and Time in the System Configuration screen and press Return. The Set Date and Time screen
appears.
Follow these steps to set the system’s date and time:
1. Select Current Date and enter the date in the appropriate format. Use one- or two-digit numbers for the
month and day, and the last two digits of the current year. The date’s numbers must be separated by
for ward slashes (/).
2. Select Current Time and enter the time in the format HH:MM, where HH is the hour (using either the
12-hour or 24-hour clock) and MM is the minutes.
Set Date and Time
System Date Format: MM/DD/YY
Current Date (MM/DD/YY): 12/9/1998
System Time Format: AM/PM
Current Time: 04:18
AM or PM: PM