Netopia R910 User Manual

Page 27

Configuring TCP/IP 5-27

Static configuration (optional)

If you are manually configuring from a fixed or static IP address, then per form the following:

Go to the Apple menu. Select
Control Panels and then TCP/IP
or MacTCP.

With the TCP/IP window open, go
to the Edit menu and select User
Mode. Choose Advanced and
click OK. In the MacTCP window,
select Ethernet and click the
More button.

In the TCP/IP window or in the
MacTCP/More window, select or
type information into the fields as
shown in the table at right.

Close the TCP/IP or MacTCP
control panel and save the
settings.

If you are using MacTCP, you
must restar t the computer. If you
are using Open Transpor t, you do
not need to restar t.

These are the only fields you
need to modify in this screen.

Option:

Select/Type:

Connect via:

Ethernet

Configure:

Manually

IP Address:

192.168.1.2

Subnet mask:

255.255.255.0

Router address:

192.168.1.1

Name ser ver address:

Enter the primar y and
secondar y name ser ver
addresses given to you by
your ISP

Implicit Search Path:
Star ting domain name:

Enter your domain name; if
you do not have a domain
name, enter the domain
name of your ISP