Netopia R910 - Manual (Page 135)

Security 13-135
Naming a new filter set
All new filter sets have a default name. The first filter set you add will be called Filter Set 1, the next filter will be
Filter Set 2, and so on.
To give a new filter set a different name, select Filter Set Name and enter a new name for the filter set.
To save the filter set, select ADD FILTER SET. The saved filter set is empty (contains no filters), but you can
return to it later to add filters (see
“Modifying filter sets” on page 13-139 ). Or you can add filters to your new set
before saving it (see “Adding filters to a filter set” on page 13-136 ).
To leave the Add Filter Set screen without saving the new filter set Select CANCEL. You are returned to the IP
Filter Sets screen.
Add IP Filter Set
Filter Set Name: Filter Set 2
Display/Change Input Filter...
Add Input Filter...
Delete Input Filter...
Display/Change Output Filter...
Add Output Filter...
Delete Output Filter...
ADD FILTER SET CANCEL
Configure the Filter Set name and its associated Filters.