Netopia R910 - Manual (Page 106)

11-106 User’s Reference Guide
From the Data Link Encapsulation pop-up menu, select PPP.
Select Data Link Options and press Return.
The Datalink (PPP/MP) Options screen appears.
Enter your User Name and Password and press Return. Press Escape to return to the Add Connection Profile
screen.
Select ADD PROFILE NOW and press Return. Your Connection Profile will be created and activated with your
authentication information to connect to your ISP’s ser vice.
Add Connection Profile
Profile Name: My_ISP
Profile Enabled: Yes
Data Link Encapsulation... PPP
Data Link Options...
IP Enabled: Yes
IP Profile Parameters...
Interface Group... Primary
COMMIT CANCEL
Configure a new Conn. Profile. Finished? ADD or CANCEL to exit.
Datalink (PPP/MP) Options
Data Compression... Standard LZS
Send Authentication... PAP
Send User Name: jagdip
Send Password: *****
Receive User Name:
Receive Password:
Dial... Dial In/Out
Dial on Demand: Yes
Idle Timeout (seconds): 300
Maximum Packet Size: 1500
Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.