Netopia R910 - Manual (Page 19)

Connecting to Your Local Area Network 4-19
Application software: This is the software you use to send e-mail, browse the World Wide Web, read
newsgroups, etc. These applications may require some configuration. Examples include the Eudora e-mail client
and the Web browsers Microsoft Internet Explorer and Netscape Navigator.
TCP/IP stack: This is the software that lets your PC or Macintosh communicate using Internet protocols.
TCP/IP stacks must be configured with some of the same information you used to configure the Netopia R910.
There are a number of TCP/IP stacks available for PC computers. Windows 95 includes a built-in TCP/IP stack.
See
“Configuring TCP/IP on Windows 95 or 98” on page 5-24 . Macintosh computers use either MacTCP or
Open Transpor t. See “Configuring TCP/IP on a Macintosh Computer” on page 5-26 .
Ethernet: Ethernet hardware and software drivers enable your PC or Macintosh computer to communicate on
the LAN.
EtherTalk: This is an AppleTalk protocol used over Ethernet.
Once the Netopia R910 is properly configured and connected to your LAN, PC and Macintosh computers that
have their required components in place will be able to connect to the Internet or other remote IP networks.
Ethernet/EtherTalk Driver
TCP/IP stack
Application software
Your PC
or Macintosh
computer
To the Netopia R910