Nortel Networks LIP-6830 - Manual (Page 79)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 73 June 07
4.5 Dial Plan
The LIP phone incorporates a Dial Plan, which monitors the user dialed digits for patterns
matching the Dial Plan number. If a matching pattern is dialed, the phone will modify the digits
and process the call using the modified digit string. The Dial Plan is defined as either a Routing
Table or a Digit Map.Table.
4.5.1 Routing
Table
Figure 4.5-1 Routing Tables Configuration
In the Routing Table up to 50 Dial Plan numbers may be defined. Each pattern can include
definitions for modifiying the dialed number. Specific entries for the Routing Table are:
- Number – digit pattern to match with the user dialed digits.
- TRNC – Truncation, defines the number of digits to delete from the dialed number.
- Pre – defines digits to insert in the front of the truncated number.
- Post – defines the digits to insert at the end of the truncated number.
- Pause – defines the position in the Number where, if matched, the phone will Pause
for additional digits before processing the call. The pause duration is programmable
with a default of 3 seconds under the [Dial] section of the Configuration file.
- Extra – IP Address of phone to assign the prefix number.
In addition to the dial pad digits, special characters can be defined as follows:
- ?– matches any single digit.