Nortel Networks LIP-6830 - Manual (Page 3)

LIP-6812 & LIP-6830 Installer Guide
June 07
Read Me First!
Stopping DHCP Binding
When the LIP Phone is powered-On, it searches for a DHCP server to get network and
configuration information. If your network has a DHCP server, the LIP-6812/LIP-6830 can get
information easily and automate provisioning. However, if a DHCP server does not exist, the
LIP Phone will continue searching for a DHCP server for an extended period of time. To stop
the search, press the ‘Settings’ button 3 times; the DHCP binding attempt will stop after few
seconds.
Applying VLAN changes at Boot-up
During a power or disconnect boot-up, the LIP-6812 & LIP-6830 may implement an an
automatic provisioning process, retrieving a configuration file from a server. If VLAN settings are
changed by the retrieved configuration file, the LIP-Phone must again reboot for normal
operation. If VLAN settings are changed, the LCD will display the reboot message as shown
below. Press the [Yes ] Softkey to reboot the LIP-6812/LIP-6830.
VLAN Changed. Reboot?
LAN[0,0] PC[0,0]
[Yes ] [ No ]