Nortel Networks LIP-6830 - Manual (Page 113)

LIP-6812 & LIP-6830 Installer Guide
Rev. 01.04 D- 5 June 07
retransmission timer for SIP messages.
Valid values are 100 to 640.
Default is 250.
timer_t2
(Optional) Highest value, in milliseconds, of the
retransmission timer for SIP messages.
Valid values are 641 to 6400.
Default is 2000.
centralized_conference
(Optional) Specifies use of a centralized conference server
to process audio for the conference.
Valid values are enable/disable
Default is enable.
conference_url
(Optional) Specifies the URI for the centralized conference
server.
Max 50 characters are available.
broadsoft_blf
(Optional) Specifies use of Broadworks BLF registration or
Shared Line registration for DSS Line types. Also defines
URL for Broadworks BLF registration.
Valid valuse are enable/disable.
Default is dosable.
max_line_num
(Optional) The number of programmable buttons used for
SIP lines and features.
Valid values are as follows:
•
LIP-6812 phone — 2 to 11
• LIP-6830 phone — 2 to 24
Default is 2.
line1_proxy_address ~
linen_proxy_address
Address of the SIP proxy servers that are used by the
phones. Enter the addresses in IP address or host name of
the proxy server. The n variable represents a phone line.
Note:
The linen_proxy_address parameter and the
linen_proxy_port parameter can be used to assign different
proxy addresses to different phone lines. The value of "n"
can be from 1 to value of max_line_num.
line1_proxy_port ~
linen_proxy_port
Port number of the SIP proxy server that will be used by
phone lines. The n variable represents a phone line.
Valid values are 1024 to 32000.
Default is 5060.
line1_displayname ~
linen_displayname
(Optional) Identification as it should appear for caller-
identification purposes. For example, instead of
[email protected] appearing on phones that have caller
ID, you can specify User A in this parameter to have User A
appear on the called party display. If a value is not specified
for this parameter, nothing is used.
The n variable represents a phone line.
Max 50 characters are available.
line1_name ~
linen_name
SIP User ID, often Number or SIP address for use when
registering. Enter a number without dashes. For example,
enter 555-0100 as 5550100. Enter an SIP address without
the host name.
The n variable represents a phone line.
Max 50 characters are available.
line1_authname ~
linen_authname
(Optional) Name used by the phone for authentication if a
registration is challenged by the proxy server during
initialization. It is required only if a proxy server requires
authentication from phones.
The n variable represents a phone line.
Max 50 characters are available.
line1_password ~ (Optional) Password used by the phone for authentication if