Nortel Networks LIP-6830 - Manual (Page 45)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 39 June 07
Problem Explanation
After DSS Console is connected to power, the
4 LEDs blink red sequentially.
DSS Console isn’t associated with an IP Phone
3.6.6 Flexible Button Setting
The programmble buttons not assigned as Line buttons can be configured for access to various
functions. Available Functions and a description of the each is provided in Table 3-1.
Table 3-1 Flexible Button Functions
Feature Description Main DSS
0 No Function Unassigned O O
1 Speed Dial Function Dials to the assigned number O O
2 Phone Book Function Views the personal phone book O -
3 Call Log Function Views the call log list O -
4 Mute Function Toggles the Mute feature On or Off O -
5 Headset Function Toggles the Headset On or Off O -
6 Redial Function Dials to the last number placed calls O -
7 Return Call Function Dials to the last number received calls O -
8 Set Call Forwarding Sets the call forwarding configuration O -
9 Conference Function 1. Makes a new conference call
2. Joins two calls for conference
3. Ends the conference call
O -
10 Transfer Function 1. Makes a new transfer call
2. Joins two calls for transfer
O -
11 Hold Function Places an active call on hold O -
12 Do not disturb Toggles the DND On or Off O -
13 Set Ringer Off Toggles the ringer On or Off O -
14 Message Function Views the number of new and old messages
stored in the Voice Mail server, and dials the
Voice Mail server by pressing [Dial] Softkey
O -
To assign a function on a Flexible button:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 3.Phone Settings using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 6.Flexible Key Setting using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
4) Select the desired flexible button.