Nortel Networks LIP-6830 - Manual (Page 32)

LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 26 June 07
To enter alpha-numeric characters select the [Mode] Softkey (refer to Appendix E. for
the character mapping of Dial pad digits).
3.5.1.5 Authentication User Name
The Authentication User Name is used to authenticate the Line appearance with the SIP Call
Server.
To assign the Authentication UserName:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 2.SIP Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Enter the Line number or move cursor using the [Next]/[Prev] Softkeys, and press the
[ OK ] Softkey to select a Line.
4) Press button, or move cursor to 5.Auth. Username using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
5) Input the Authentication User Name for the LIP-6812/LIP-6830 using the Dial pad.
6) Press
the [ OK ] Softkey to save your Configuration.
7) Press the button to exit from the menu.
To enter alpha-numeric characters select the [Mode] Softkey (refer to Appendix E. for
the character mapping of Dial pad digits).
3.5.1.6 Authentication
Password
The Authentication Password is used in conjunction with the Authentication Name to
authenticate the Line appearance with the SIP Call Server.
To assign the Authentication Password:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 2.SIP Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Enter the Line number or move cursor using the [Next]/[Prev] Softkeys, and press the
[ OK ] Softkey to select a Line.
Enter Auth. UserName [1]
1234
[ Å ] [Mode] [ OK ] ¼