Nortel Networks LIP-6830 - Manual (Page 118)

LIP-6812 & LIP-6830 Installer Guide
Rev. 01.04 D- 10 June 07
Default is 5.
lang
(Optional) Specifies the language of strings displayed on the
LCD.
Valid values are as follows:
•
0 — english
• 1 — french
• 2 — korean
• 3 — danish
But the supported languages can be limited by the LCD type
of LIP Phone.
Default is 0 (english).
lock_outgoing_call
(Optional) Enables or disables locking an outgoing call. Valid
values are as follows:
•
0 — unlock
• 1 — lock
Default is 0 (unlock).
use_speed_number
(Optional) Enables or disables using Speed Number dialing.
Valid values are as follows:
•
0 — disable
• 1 — enable
Default is 1 (enable).
web_server
(Optional) Specifies the web server activity.
Valid values are as follows:
•
0 — disable
• 1 — enable
Default is 1 (enable).
telnet_server
(Optional) Specifies the telnet server activity.
Valid values are as follows:
•
0 — disable
• 1 — enable
Default is 1 (enable).
phone_password
(Optional) Specifies the LCD Menu and Phone Lock password
Valid value is 4-digits string.
Default is a null string.
function private_hold
(Optional) Specifies soft key access for Private Hold.
Valid values are disable and enable.
Default is disable.
function barge-in
(Optional) Specifies soft key access for Barge-In.
Valid values are disable and enable.
Default is disable.
SYSTEM
function cdp
(Optional) Specifies cdp on reboot to define VLAN
Valid values are disable and enable.
Default is enable.
type
(Optional) Specifies the provisioning type. The LIP Phone
supports two types of provisioning, TFTP and HTTPS.
Valid values are as follows:
•
0 —TFTP • 1 — HTTPS
Default is 0 (TFTP).
cfg_downlaod
(Optional) Whether to get a configuration file from the
provisioning server. Valid values are disable and enable.
Default is enable.
sw_downlaod
(Optional) Whether to get a new firmware from the
provisioning server. Valid values are disable and enable.
Default is enable.
dhcp_get_tftp
(Optional) Whether to get a TFTP server address using option
66 or 150 on DHCP. Valid values are disable and enable.
Default is enable.