Nokia 2116 - Manual (Page 78)

U s i n g y o u r N o k i a C D M A p h o n e a s a m o d e m
78 Copyright © 2005 Nokia. All rights reserved.
• Select "Install the software
automatically (Recommended)"
then click Next.
• Computer will search for newly
installed driver. If any error
messages are displayed, click
Continue anyway.
• Click Finish to complete the
DKU-5 or CA-42 data cable
installation.
■ Installation of Nokia
CDMA Modem Driver
• Before installing the modem
driver, you need to know the COM
port used by DKU-5 or CA-42
data cable. To check the COM
port used, click Start > Control
Panel > Switch to Classic View.
Note: For Windows2000, click
Start > Control Panel.
• Select System > Hardware >
Device Manager.
• Click Ports (COM & LPT). If Port
1 on Nokia Adapter indicates
COM5, then select COM5 during
installation of the modem driver.
COM port used by DKU-5 or
CA-42 data cable can be
different on different computers.
In some computers, COM port
used will always change when
you disconnect DKU-5 or CA-42
data cable from the computer.
Therefore, before making any
Internet connection to Nokia
CDMA phones, please make sure
that Port used for modem is the
same port, as detected by Device
Manager.
• Modem installation will proceed.
Click Start > Control Panel >
Switch to Classic View.
Note: For Windows2000, click
Start > Control Panel.
• Select Phone and Modem
Options.
• On upper side, there are several
Tab options: Dialing rules,
Modems, Advanced.
• Select Modems, then Add, click
Don't detect my modem > Next
> Have Disk.
• Click Browse, then browse to
nmpCDMA_1x(USB).inf file that
you downloaded from
www.nokia-asia.com or
http://www.nokiausa.com/
phones/software/.
• Click OK.
• Select Nokia CDMA2000 1X 3G
Packet Data Modem, click Next.
• Select the same COM port as
detected by Device Manager,
and click Next > Continue
Anyway.
• Modem installation is completed.
Click Finish to complete modem
installation.