Nokia 2116 - Manual (Page 48)

S e t t i n g s
48 Copyright © 2005 Nokia. All rights reserved.
Set a timed profile
Timed profiles can be used to
prevent missed calls. For example,
you attend an event that requires
your device be set to
Silent before
the event starts, but you forget to
return it to
General until long after
the event. A timed profile can
prevent missed calls by returning
your device to the default profile at a
time you specify.
Timed profiles can be set up to 24
hours in advance.
1. In the standby mode, select Menu
> Settings > Profiles .
2. Select the profile you wish to
activate.
3. Select Timed .
4. Enter the time for the profile to
expire, and select OK .
■ Tone settings
From this menu, you can adjust the
ringing volume, keypad tones, and
other tone settings for the currently
active profile. You can also set the
device to ring for calls from phone
numbers that belong to a selected
caller group. See
"Personalise a
profile" , page 47 .
■ Call settings
Anykey answer
Anykey answer allows you to answer
an incoming call: briefly press any
key except the power key, right
selection key, or end key.
In the standby mode, select Menu >
Settings > Call settings > Anykey
answer > On or Off .
Automatic redial
Occasionally, your network may
experience heavy traffic, resulting in
a fast busy signal when you dial.
With automatic redial activated,
your device redials the number until
the call is successful, or is
terminated.
In the standby mode, select Menu >
Settings > Call settings > Automatic
redial > On or Off .
Speed dialling
You can activate or deactivate speed
dialling. In the standby mode, select
Menu > Settings > Call settings >
Speed dialling > On or Off . See
"Speed dialling" , page 27 .