Nokia 2116 - Manual (Page 54)

S e t t i n g s
54 Copyright © 2005 Nokia. All rights reserved.
Date
Show or hide the date
In the standby mode, select Menu >
Settings > Time and date settings >
Date > Show date or Hide date .
Set the date
1. In the standby mode, select Menu
> Settings > Time and date
settings > Date > Set the date .
2. Enter the date, and select OK .
Change the date format
In the standby mode, select Menu >
Settings > Time and date settings >
Date > Date format and the format
of your choice.
Change the date separator
In the standby mode, select Menu >
Settings > Time and date settings >
Date > Date separator and the
separator of your choice.
Set the auto-update
Auto-update is a network service.
See
"Network Services" , page 9 .
If your wireless network operator
supports this feature, you can allow
the digital network to set the clock,
which is useful when you are out of
your home area (for example, when
you travel to another network or
time zone).
In the standby mode, select Menu >
Settings > Time and date settings >
Auto-update of date & time > On ,
Confirm first , or Off .
If you use the Auto-update of date &
time option while outside your
digital network, you may be
prompted to enter the time
manually. Network time will replace
the time and date when you re-enter
your digital network.
If your battery is removed or
discharged outside the digital
network, you may be prompted to
enter the time manually (once the
battery is replaced or recharged and
you are still outside of the digital
network).
■ Voice commands
Voice commands allow you to
quickly perform certain commands
by speaking them, instead of using
the keypad to access them. For
example, you can switch your
profile, call voicemail, playback a
voice memo, or review recent calls
by speaking the recorded command.