Nokia 2116 - Manual (Page 55)

S e t t i n g s
Copyright © 2005 Nokia. All rights reserved. 55
Add a voice command
Before using a voice command, you
must add the command to the
device function.
1. In the standby mode, select Menu
> Settings > Voice commands .
2. Select the device function you
wish to tag: Profiles , Voice
mailbox , Voice recorder , or Call
register .
3. If necessary, select an option
associated with that function,
and select
Options > Add
command .
4. Select Start , and speak the voice
command clearly into the
microphone.
Do not select Quit unless you want
to cancel the recording.
The device replays then saves the
recorded command.
appears
next to functions that have voice
commands assigned.
Activate a voice command
After you have associated a voice
command with a device function,
you can request the function by
speaking the voice command.
1. In the standby mode, select and
hold Contacts .
2. When Speak now appears, say the
voice command clearly into the
microphone.
When the device finds the voice
command,
Found: appears, and the
device plays the recognised voice
command through the earpiece. The
function you requested is activated.
Voice command options
After you have associated a voice
command with a function, select
one of the following options:
Playback —Listen to the voice
command.
Change —Change the voice
command.
Delete —Erase the voice command.
■ Enhancement settings
The enhancement settings menu is
shown only if the device has been
connected to a compatible
enhancement.
In the standby mode, select Menu >
Settings > Enhancement settings >
Headset , Handsfree , Loopset , Text
phone , or Charger and the desired
accessory.