Security code, Pin code, Security code pin code – Nokia 2116 User Manual
Page 57
S e t t i n g s
Copyright © 2005 Nokia. All rights reserved.
57
Security code
The preset security code is 12345.
When you change the security code,
keep the new code secret and in a
safe place separate from your phone.
Avoid using codes similar to
emergency numbers such as 112 to
prevent accidental dialling of the
emergency number.
Note: If you enter the wrong
security code five times in
succession, you will not be
able to enter a code for five
minutes, even if you power
off the phone between
incorrect entries.
Change the security code
1. In the standby mode, select
Menu
>
Settings
>
Security settings
>
Access codes
>
Change security
code
.
2. Enter the current security code
(the default is 12345), and select
OK
.
3. Enter the new security code (5
characters), and select
OK
.
4. Re-enter the new security code
for verification, and select
OK
.
When you change your security
code, store it in a safe place, away
from your device. Avoid entering
access codes similar to emergency
numbers to prevent accidental
emergency calls.
PIN code
The PIN code must be obtained from
your wireless network operator and
is typically provided with your UIM
card. The PIN code can be 4-8 digits
in length. After three successive
incorrect entries the PIN code is
blocked and you are asked to enter
the personal unblocking key (PUK)
code. See
PIN code request
Enable your phone to request the
PIN code when powered on. This
provides extra security in case your
phone is lost or stolen.
1. In the standby mode, select
Menu
>
Settings
>
Security settings
>
PIN code request
.
2. Enter the PIN code, and press
OK
.
3. Select
On
, and press
OK
.
Change PIN code
Before you can change your PIN
code, you must enable PIN code
request. See
1. In the standby mode, select
Menu
>
Settings
>
Security settings
>
Access codes
>
Change PIN code
.
2. Enter the current PIN code, and
press
OK
.