Nokia 2116 - Manual (Page 51)

S e t t i n g s
Copyright © 2005 Nokia. All rights reserved. 51
Data calls only —The device
receives only data calls.
Fax calls only —The device
receives only fax calls.
2. When you are finished receiving
the fax or data call, repeat Steps
1 and 2 and select
Normal .
Data transfer
To view the transmission speed
when sending or receiving data or
fax calls, in standby mode, select
Menu > Settings > Call settings >
Data/fax calls > Data rate display >
Graphic or Off .
Call Summary
Your device can display the time
spent on a call when you hang up.
In the standby mode, select Menu >
Settings > Call settings > Call
summary > On or Off .
■ Phone settings
Phone language
1. In the standby mode, select Menu
> Settings > Phone settings >
Phone language .
2. Select the language of your
choice.
The language setting may affect the
time and date formats of the clock,
alarm clock, and calendar.
Automatic keyguard
You can set the keypad of your
device to lock automatically after a
preset time delay.
1. In the standby mode, select Menu
> Settings > Phone settings >
Automatic keyguard > On or Off .
2. If you select On , Set delay: is
displayed.
3. Enter the delay time (in minutes
and seconds), and select OK .
When keyguard is on, it may be
possible to dial the emergency
number programmed into your
device.
DTMF tones
DTMF tones are the tones that sound
when you press the keys on your
device keypad. You can use DTMF
tones for many automated dial-up
services such as banking and airlines
or for entering your voice mailbox
number and password.
DTMF tones are sent during an active
call. You can send them manually
from your device keypad, or send
them automatically by saving them
in your device.