Nokia 2116 - Manual (Page 52)

S e t t i n g s
52 Copyright © 2005 Nokia. All rights reserved.
Set type
1. In the standby mode, select Menu
> Settings > Phone settings >
DTMF tones > Manual DTMF
tones .
2. Select one of the following
options:
Continuous —The tone sounds for
as long as you press and hold a
key.
Fixed —Used to send tones of the
duration you specify in the DTMF
tone length option.
Off —Used to turn off tones. No
tones are sent when you press a
key.
Set length
You can also specify DTMF tone
length when using the
Fixed option.
In the standby mode, select Menu >
Settings > Phone settings > DTMF
tones > DTMF tone length > Short
(0.1 second) or Long (0.5 second).
Welcome note
You can write a welcome note that
briefly appears on the display screen,
if provided by your network
operator, whenever you switch your
device on.
Dictionary input is not available for
entering Welcome note text.
1. In the standby mode, select Menu
> Settings > Phone settings >
Welcome note .
2. Enter a note (up to 44
characters).
Press * to display and select from
available special characters.
3. When you are finished, select
Options > Save .
Select Delete if you want to delete
the previous text and begin creating
another welcome note.
Confirm UIM service actions
This option allows you to request
notification when your network
operator makes changes to UIM-
related services.
For availability, rates, and
information on using UIM services,
contact your UIM card vendor, for
example, network operator, network
operator, or other vendor.
Select Menu > Settings > Phone
settings > Confirm UIM service
actions > Yes or No .