Nokia 2116 User Manual

Page 41

M e s s a g e s

Voice mailbox number and
process

1. Write down your voice mailbox

number.

2. Call and check your voice mail as

you normally would.

3. Write down your step-by-step

interaction with the recorded
prompts. Remember that each
voice mail service varies. Your
steps may resemble the
following:

Dial 2145551212, pause 5
seconds, press 1, pause 2
seconds, press 1234 and *.

Be precise; you need this
information to set up your voice
mail with dialling codes.

Dialling codes

Press * repeatedly to cycle through
dialling codes. When the desired
code appears in the display, pause
briefly and the code is inserted into
the dialling string.

The following dialling codes are
available:

Set up voice mail with dialling
codes

1. In the standby mode, select

Contacts

Speed dials

2. Scroll to an empty speed dialling

slot, and select

Assign

3. Enter your voice mailbox number,

including the area code.

4. Refer to dialling codes, and enter

codes as necessary using the
information that you saved from

"Voice mailbox number and
process"

, page

For example, if you pause for
5 seconds after connecting to
voice mail, enter p twice after the
voice mailbox number (for
example, 2145551212pp).

Dialling
code

Indicates...

Bypasses a set of
instructions.

Causes the International
access code to be replaced
by +. This is a carrier-
dependent feature.

Pauses for 2.5 seconds
before sending any
numbers that follow.

Waits for you to press the
call key before sending the
numbers or codes that
follow.

Dialling
code

Indicates...