Nokia 2116 - Manual (Page 50)

S e t t i n g s
50 Copyright © 2005 Nokia. All rights reserved.
4. Press the end key to return to the
standby mode screen; then enter
the phone number, including any
prefix (such as 0 or 1) that your
calling card may require when
you make a calling card call. See
your calling card for instructions.
5. Press and hold the call key for a
few seconds until Card call is
displayed.
6. When you hear the tone or
system message, select OK .
International prefix
International prefix options are
carrier dependent.
You can store an international
dialling prefix into your device.
When you enter + at the beginning
of a phone number, your device
automatically inserts the
international dialling prefix that you
have stored.
1. In the standby mode, select Menu
> Settings > Call settings >
International prefix .
2. Enter the international dialling
prefix (for example, 0011) and
select
OK .
3. In the standby mode, press *
twice to use + and enter the
phone number you wish to call,
for example, +3546789.
The device dials the international
dialling prefix you have stored in
your device and the phone
number you have entered (for
example, the device dials
00113546789).
Data and fax calls
Data or fax calls is a network service.
See
"Network Services" , page 9 .
If your wireless network operator
supports this feature, you can set up
the device to send or receive data or
fax calls when a terminal, such as a
PDA or PC, is connected.
For better performance during data
calls, place the device on a
stationary surface. Do not move the
device by holding it in your hand
during a data call.
For more information on
connectivity, see the PC/PDA
Connectivity Guide. The PC/PDA
Connectivity Guide can be
downloaded from the Nokia web site
at http://www.nokia.com/us.
1. In the standby mode, select Menu
> Settings > Call settings > Data/
fax calls > Incoming data/fax call
and one of the following options:
Normal —The device receives
incoming calls as usual.