Panasonic PT-EW630U - Manual (Page 91)

About indicator status
ENGLISH -
91
Maintenance
When there is a problem with internal temperature
J
The status of the indicator is displayed with the following symbols.

: Off, : On, : Flashing, „
:
Off or On or Flashing
Indicators
Status of the projector
STANDBY(R)>
Green/Red/
Orange
Red Orange
AV MUTE>
Blue
Orange
 //  * 1 „ * 2 „ * 2 „ * 2
If the temperature within the projector becomes
too high, the temperature indicator will
start to flash slowly.
 //  * 3  * 4 „ * 2 „ * 2 „ * 2
If the temperature within the projector becomes
even higher, the temperature indicator
will flash faster, the power indicator
STANDBY(R)> will turn off, and the projector
will turn off automatically.
The projector will not turn back on even
when pressing the button on
the remote control or the <
> button on
the side control. When the projector returns
to the normal operating temperature, the
standby indicator will
change to on. The projector will turn back on
when pressing the button on
the remote control or the <
> button on
the side control. (The temperature indicator
will remain flashing.) Check the air
filter.
 //  * 3  * 4 „ * 1 „ * 1 „ * 1
The projector has cooled inside, and returned
to operating temperature. Pressing the
button on the remote control
or the <
> button on the side control will
make the temperature indicator stop
flashing and operate the projector. Check the
air filter.
*1: The indicator will flash in approximately 2-second intervals.
*2: The indicator will change according to different conditions, regardless of the status of other indicators.
*3: The indicator will flash in approximately 1-second intervals.
*4: The indicator will flash in approximately 0.5-second intervals.