Panasonic PT-EW630U - Manual (Page 37)

Powering ON/OFF
ENGLISH -
37
Basic Operation
ON(G)/STANDBY(R) indicator
The indicator informs you the status of the power. Confirm the status of the
STANDBY(R)> indicator before operating the projector.
ヵユヮヱ ヰワ⾷ヨ⾸バ
チヴヵモワュャヺ⾷ン⾸
ョリロヵユン ヴラヶヵヵユン ロモヮヱ
Indicator status Status
No illumination or flashing The power cord is unplugged.
RED Lit
The power cord is plugged.
The projector is in stand-by mode, after the cooling is completed.
ORANGE Flashing
The projector is cooling down. The projector cannot be turned on until cooling is
completed and the indicator stops blinking.
The temperature inside the projector is abnormally high and the projector is cooling
down. And the indicator also blinks in red ( Æ page 92). The projector
cannot be turned on until cooling is completed and the
indicator stops blinking.
GREEN
Lit Projecting.
Flashing
The projector is in stand-by status with [Power management] function.
The projection lamp will be turned on if the input signal is reconnected or any
button on the control panel or remote control is pressed. ( Æ page 68)
indicator