Philips DVDR7300H - Manual (Page 82)

E
n
g
lis
h
82 83
Firmware Upgrade
Installing the latest firmware
Periodically Philips will issue upgrades for
the firmware that was initially installed in
your recorder as the firmware is
continuously refined for greater stability
and compatibility of the recorder.
CAUTION! Power supply must not be
interrupted during upgrade!
Jump forward
System
Setup
Eco mode
Second RC
System
Setup
mm : ss
Jump back
Version Info
mm : ss
OSD
Off
Off
Full
Display Bright
A Get the version information of this
recorder by pressing SYSTEM on the
remote control and select { Setup } >
{ System } > { Version Info } in the
menu.
 Write down the information for your
current software version.
B Visit the Philips website ‘www.philips.
com/ support’ to check the availability of
the latest firmware upgrade. Download
the firmware to a CD-ROM.
C Press OPEN CLOSE ç on the front
of the recorder to open the disc tray.
D Insert the CD-ROM and press OPEN
CLOSE ç again.
 The firmware will start to install on
the recorder automatically.
dvdr7300h_eu_eng2.indd 82 2005-10-04 4:16:18 PM