Philips DVDR7300H - Manual (Page 11)

E
n
g
li
sh
11
Main Unit
a STANDBY-ON 2
– Turns the recorder on or to standby
mode.
b Disc tray
c OPEN CLOSE ç
– Opens or closes the disc tray.
d Display panel
– Shows information about the current
status of the recorder.
e GUIDE
– Enters/exits the GUIDE Plus+ system.
f OK
– Confirms an entry or selection.
g   : Cursor buttons for moving to the
left/right, or select the previous/next
scene.
 : Cursor buttons for moving up/down
or select previous/next title in the
temporary HDD storage during playback.
h HDD
– Displays the content browser menu.
– Lights up while access the HDD browser
menu.
i 
– Starts playback of the selected title/track.
/
– Skips to the previous or next chapter/
track. Hold down the button to make a
reverse/forward search.

– Stops playback/recording.
j 
– Starts recording the current TV
programme or the current video input
source.
– Marks the title in the time shift buffer for
recording onto the HDD.
– Lights up while recording to the HDD or
recordable DVD is in progress.
Sockets behind the flap
Flip down the door as indicated by the
OPEN  label at the right hand corner.
k S-VIDEO
– S-video input for SVHS/Hi8 camcorders
or SVHS/Hi8 video recorders.
Press CAM on the remote control
repeatedly to select ‘CAM1’ when using
this input source.
l VIDEO
– Video input for camcorders or video
recorders.
Press CAM on the remote control
repeatedly to select ‘CAM1’ when using
this input source.
m L/R AUDIO
– Audio input for camcorders or video
recorders.
n DV IN
– Inputs for digital camcorders using this
connector.
Press CAM on the remote control to
select ‘CAM2’ when using this input
source.
dvdr7300h_eu_eng2.indd 11 2005-10-04 4:13:45 PM