Rejecting calls, Rejecting calls –19, Rejecting – Polycom 560 User Manual
Page 39: Calls
Customizing Your SoundPoint IP® 560 Phone
2 - 19
To set a distinctive ring type for a particular contact:
1.
Press .
2.
Select Contact Directory.
3.
Use
and
to scroll through the list to find the contact.
You can also use the * key to Page Up and the # key to Page Down.
4.
Press the Edit soft key and scroll down to the Ring Type field.
5.
Enter the number corresponding to one of the ring types available.
For more information, refer to
on page
.
6.
(Optional) To remove an existing value, press
followed by
.
7.
Press the Save or Cancel soft keys to accept or cancel changes.
8.
Press
or
the
Exit soft key repeatedly to return to the idle
display.
Rejecting Calls
You can customize your phone so that incoming calls from a particular party
are immediately sent to your voice mail.
To send incoming calls from a particular contact directly to voice mail:
1.
Press .
2.
Select Contact Directory.
Note
This feature is local to the phone, and may be overridden by your organization’s
settings. For more information, contact your system administrator.
Note
Rejecting calls is not available on shared lines.