Powerware UPS Sidecar Powerware 9390 User Manual
Page 22

INSTALLING THE UPS SIDECAR
EATON Powerware
®
9390 UPS Sidecar Installation and Operation Manual
S 164201586 Rev E www.powerware.com
2-6
17. Align the holes in the other end of the bracket with the holes in the bottom
right-hand side of the UPS Sidecar attached to UPM 1 (see Figure 2-3). Secure
the bracket with M4 screws from the field kit.
18. Secure the large nut on the UPM 2 hinge.
19. Continue to paragraph 2.4.2.
UPM 1 UPS Sidecar
Top View with Small Bracket
Front View with Large Angle Bracket
Existing
Screw
Small Flat Bracket from Kit
M4 Screw
and Four Washers
from Kit
Nut from Kit
Existing Hinge
M4 Screws from Kit
Large Angle Bracket from Kit
UPM 2
UPM 1 UPS Sidecar
UPM 2
Figure 2-3. UPM 1 to UPM 2 Joining Brackets