Patton electronic SmartNode 4830 Series - Manual (Page 70)

ADSL Daughter Card (if applicable) 70
SmartNode 4830 Getting Started Guide B • Specifications
• Isolation 1,500 Vrms
ADSL Daughter Card (if applicable)
ADSL2+ ITU-T G.992.1 Annex A, B, G.992.2 G.dmt, G.lite, G.992.3 Annex L, I, J
8 user configurable PVCs
ATM QoS per PVC (UBR, CBR, VBR-rt)
Supports PPPoE, Routed IP over ATM
G.SHDSL Daughter Card (if applicable)
Table 16. G.SHDSL Daughter Card Specifications
Factor Specs
DSL • ITU-T G.991.2 (and Amendment 2)
• ITU-T G.991.2, Annex A, B, F, G
• Upgradable to ITU-T G.shdsl.bis—Annex F and G
• G.991.2 2/4 (1/2 pair) operation
• G.994.1 (G.hs) (per G.991.2)
• ITU-T G.991.2 Section E.9
(TPS-TC for ATM transport)
• ITU-T G.991.2 Section E.11
(TPS-TC for PTM transport)
DSL Connection RJ-11/12 (2-wire)
Management • I.610 OAM F4/F5
• Management interfaces: GUI and Telnet
• Software upgrade: GUI and TFTP
ATM Support • Classical IPoA (RFC 1577/2225)
• PPPoE Client (over ATM) (RFC 2516)
• IPoA (RFC 2684/1483)
• ATM AAL5 encapsulation
• Max. 8 PVCs
• User selectable VC MUX and LLC MUX (default)
• Configurable auto-connection
• ATM QoS: UBR (default), CBR, and VBR-rt, VBR-nrt,
UBR: per VC queuing
• Auto-configuration: TR-037 & ILMI 4.0
Interworking/Interoperability • G.SHDSL Interoperability:
- Alcatel
- NEC
- Lucent Anymedia
- Lucent Stinger
• BRAS Interoperability:
- Cisco
-Redback