Panasonic DP-6530 - Manual (Page 150)

1
2
3
4
5
6
7
8
9
10
11
12
7-22
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
3 Pull out the grip of the saddle staple holder
toward you and turn it 90 o clockwise in the
direction of the arrow.
4 Remove the empty staple case and set a new one.
- Replace both staple cases with new ones.
- Do not remove the seal holding the staples before the staple
case is set in the cartridge.
5 Return the saddle stitch holder and the saddle stitch
unit to their respective original positions.
2 Slide out the saddle stitch unit carefully toward the
front.
Saddle Stitch Unit
* Only when the Saddle-Stitich Finer (DA-FS815) is installed.
1 Open the lower cover of the saddle stitch finisher.
5. ADDING STAPLES (OPTIONAL) (Cont.)