Panasonic DP-6530 - Manual (Page 122)

1
2
3
4
5
6
7
8
9
10
11
12
6-2
SELECTING FINISHING MODES
1. FINISHING MODES AND FINISHERS (OPTIONAL)
There are 2 types of optional finishers (2-Bin Finisher/DA-FS810
and 2-Bin Saddle-Stitch Finisher/DA-FS815).
Functions available differ depending on whether a finisher is
installed and which type of finisher it is.
- Press the key on the basic screen on the right (shaded), and
confirm the finishing modes on the panel.
* The touch panel used in this chapter appears when the optional
2-Bin Saddle-Stitch Finisher (DA-FS815) is installed with your
machine.
Names of the Main Components
When the finisher trays reach their maximum loading capacity
(
Page 9-4), the following message appears:
Hole Punch Unit
(DA-SP81)
Upper Cover
Trays
Front Cover
Saddle Stitch Tray
(DA-FS815 only)
Lower Cover
Remove the copies from the trays and the machine
automatically resumes making machine.
Remove paper from the finisher