Panasonic DP-6530 - Manual (Page 101)

1
2
3
4
5
6
7
8
9
10
11
12
5-13
5. WEEKLY TIMER
Using the built-in weekly timer, you can have the machine automatically turned ON and OFF at specified
times. For instance, you can set the timer for the starting time and closing time of your office so that the
machine will automatically turn itself ON and OFF at those specified times.
- The ON/OFF times of the weekly timer are retained until they are changed. When the weekly timer is
resumed, the previous settings will again become effective.
- When the weekly timer is in use, the timer lamp on the control panel lights.
* When the power switch is turned off, the weekly timer does not work.
1 Press the PROGRAM key to enter the program
menu, and press the WEEKLY TIMER key.
- The WEEKLY TIMER key is half-tone shaded when the
weekly timer has already been set.
2 Check the settings on the display, and if corrections
are necessary, press the CHANGE key.
- If no correction is needed, press the SET key.
3 Set the ON/OFF times for each day of the week.
- Use the SUN and SAT keys to switch the days of
the week.
- Key in numbers using the digital keys. After entering each
number, press the upper SET key.
- After setting the times for all the days of week, press the
lower SET key. The WEEKLY TIMER key becomes
half-tone shaded.
Copying when the Power is OFF
The machine can be used if you press START key.
- If you leave the machine for a while after the copy is finished, it
will automatically return to OFF-mode by the weekly timer.
For holidays when the machine is not turned on, key in the
same times for both ON and OFF, eg. ON:00:00 and
OFF:00:00.