Philips 862478 - Manual (Page 176)

Measuring and Displaying Parameters
12-4 Specifications
Measuring and Displaying Parameters
ECG
Parameter Specification
Heart Rate Range 20-250 b/min
Heart Rate Accuracy ±5 b/min
Bandwidth: Normal Monitoring 0.5 Hz - 40 Hz
Bandwidth: Extended Low Frequency Range (use
selectable) 0.05 Hz - 40 Hz
Leads 3 lead, user selectable
Display Sweep Speeds 12.5, 25, and 50 mm/sec
Pacemaker Detection Indicator on waveform display, user
selectable
ECG size (sensitivity) 0.5, 1, 2, 4 mV/cm
Lead-off Detection detected and displayed
Input Impedance >5 M Ω
CMRR (Common Mode Rejection Ratio) >90 dB at 50 or 60 Hz
Input Dynamic Range ±5 mV AC, ±300 mV DC
Defibrillator Discharge <5 sec per IEC 60601-2-27
Recovery <8 sec per AAMI EC13-1992