Removing the patient monitoring i/o module, Removing the patient monitoring i/o module -13 – Philips 862478 User Manual

Page 137

background image

Disassembly Procedures

Disassembly

7-13

Removing the

Patient

Monitoring I/O

Module

Follow these instructions for removing the I/O module from the Main PCB module.

Step

Action

1

Remove the following 2 screws to remove the connector module.

Note—

Use a flathead screwdriver to remove Screw #1.

2

Slide the I/O module out.

3

Disconnect the CO

2

connector and tubing and the NBP tubing. Slide the CO

2

exhaust tubing out.

4

Pull the I/O module away.

Screw #1

Screw #2

Patient

Monitoring

I/O Module

This manual is related to the following products:
See also other documents in the category Philips Health and hygiene: