Cabinet installation – Powerware 9155 UPS20-30kVA User Manual
Page 13
13
UPS 20-30 kVA, 230 V 0/60 Hz output
User’s Guide
1026743
Revision B
5. Cabinet installation
The required distance for UPS units next to each other is ten millimetres. The same applies
to the optional battery cabinets that should be installed next to the UPS cabinet. It is
recommended to install the battery cabinet on the left hand side of the UPS.
Figure 4 UPS and external battery cabinets.
Note!
UPS cabinets can fall over if the shipping brackets are not used. Both rear and front
shipping brackets must be used to secure the UPS cabinet to the floor.
The UPS family has several alternative battery cabinets and configurations depending on the
selected back-up time and quality of batteries.