Panasonic DP-6010 - Manual (Page 222)

Glossary
222
Protocol A protocol is the special set of rules for communicating that the end points in a
telecommunication connection use when they send signals back and forth. Both end points
must recognize and observe the protocol.
PSTN Public Switched Telephone Network. Network of interconnected switching equipment and
transmission facilities.
Qwerty Keyboard A keyboard on the Touch Panel Display that is used to enter letters and symbols for various
programming functions.
Receiving Password A 4-digit password that is checked before a document is received.
Relay Address A 3-digit code that identifies your machine is programmed in a relay network.
Relay Network A group of facsimile machines that communicate via a relay station.
Relay Station A certain type of facsimile machine that can store and forward documents to an end receiving
station and/or a relay station in another relay network.
Your machine can not be used as a relay station.
Relay Transmission
Report A report that contains information regarding the last document transmission to a relay station.
Relayed Transmission Sending a document to a relay station, which in turn, sends the document to the end
receiving station.
Resolution Relates to the number of dots scanned or printed per certain square. The quality of the
image increases as the number of dots per certain square increases.
Rotation XMT
The document is set as ( ), the image is rotated by 90º and then transmitted as ( ).
Router (Gateway) A special purpose computer (or software package) that handles the connection between 2 or
more networks.
Gateways act like traffic cops, they spend their time looking at the destination addresses of
the packets passing through them and deciding which route to send them on.
Selective Reception A function that can be set so that your unit will receive from only those machines
programmed into your dialer.
Sender Selection The user can select one of 24 pre-programmed sender’s name and email address/telephone
number before each transmission.
Server A computer, or a software package, that provides a specific kind of service to client software
running on other computers.
A single server machine could have several different server software packages running on it,
thus providing many different servers to clients on the network.
Sleep Mode The lowest power state that the machine enters after the specified time without actually
turning off.
SMTP (Simple Mail
Transfer Protocol) This is the main communication protocol used to send and receive email on the Internet.
Station Name Alphanumeric ID which can be programmed for each phone number or email address
location in the Address Book.